Diy Solar Panels – Wow!

Solar panels are a device that converts light into electricity. They are called ‘solar’ panels because they are the most potent source of light available is the sun. The sun’s rays is whats used to heat the solar panels. A solar panel is a group of solar cells. These cells are spread over a wide area and works together to provide adequate power to be used. The more light that hits a cell, the more electricity it produces.

By installing your very own energy system you can quickly reduce or eliminate your monthly electricity bills, with diy solar panels you can save as much as 90 per cent compared with the cost of buying the manufacture solar panels and having them installed. Greatest thing of all is as long as all the final wiring is made by a local electrician, your diy solar system still qualifies you for governments tax rebates, further reducing the price of your solar panels, when choosing the do-it-yourself route to go. There are a few tips that may be in a position to increase the ease of your conversions to solar energy, below I will provide you with some information on the means to start a diy solar project from home. diy solar panels? No matter what you feel you are knowledgeable about diy solar panels, please visit complete article, and learn more about this subject..

Sometimes success lies in the detail. Often it’s the little things that makes a great difference in getting the right start. Many people often doubt themselves and their capacity to make there very own diy solar project, they feel for one reason or another that home made solar panels will never be as effective as professionally made ones; where as the reality actually is that solar panels really are not all that complicated to build, and can tell you the same finishing results as the manufactured made panels. Here are 5 tips that will help make the best use of your time and money.

Moving Forward With This

An Instructional Guide-is the most important thing to begin. A professionally written diy solar panel guide can make all the difference in the world, as opposed to misleading information you got from another source. FYI’ there have been reported incidents during the past that has resulted in house fires ‘, this is why professional information is so important., for more details…..

Build solar panel-according to guides instructions, and do not decide to use cheap parts (IE. Broken solar cells), or lower quality material as a way of saving money in your pocket. Use parts suggested in instructional guide, you will be much happier with the end results this way.

The only part of your DIY solar panel that you shouldn’t buy at the local hardware store are the actual solar cells. Some stores will sell these but they’re very expensive. Here is a tip. Just buy broken solar cells on ebay and then fix them with a soldering gun. This is a very easy fix that anyone can do. If you have already purchased a good solar panel building guide you’ll see exactly how to perform this.

You should likewise be aware that one of the major factors in the establishment of a solar panel is to make sure that the solar cells are connected in the right path so that the power is flowing in one direction. Not getting this right will ruin all that you’re trying to do, so do not skip over the methods of making such important step.

Use ISO Certified Breakers / Inverters / Controllers-don’t build your own charge controllers, inverters or buy radio shack switches. A single solar panel is only 12 volts so the danger of fire is about nil. On the other hand, when you wire 10 of them together the voltage and amperage increases. Be sure to employ a certified charge controller and DC inverter. These parts are cheap and will reduce the possibility of fire.

The solar panel is attached to a solar charge controller. The main terms of a charge controller is to regulate the power and fully charged battery without excessive cost and prevents reverse current flow at night when the charging process stops. You should follow the instructions that came with the control unit to the smooth and safe installation.

Connect the solar charge controller for charging a deep cycle. The battery starts charging as long as there is sunlight if the battery is full. The solar charge controller in step 2 prevents the battery from overcharging. When the battery is fully charged, the controller will stop charging and the charging process restarts each time the power indicator detects that the battery is fully charged level and sunlight is shining in solar panels.

Have An Electrician Do The Final Wiring-an electrician is the best option for final wiring, especially if your home is already linked to the power grid, this will work to ensure that you are not dealing with high voltage coming through the grid. In many places it is against the law to wire DIY power meters (or projects) to your home.

Check Your Panels-checking your solar panels at least once each year, will make sure everything is working and up of the way its suppose to be. Make sure they’re still sealed well, and if you use a material like plywood as a breaker, do not forget to ensure they stay painted.

Your diy solar panel will do the work required to power your homes electricity by following the above 5 tips. Making sure your panel is in tack every once in a while will ensure you renewable energy for 25-30 years (life expectancy of solar panels).


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s